Skip to content
Aarve Solar

Products · Aarve Solar

Solar lights

Lighting without the grid — capture sunlight by day, create light by night.

Street, garden and ambient

WhatsApp enquiry+91 90367 54985
Solar lights installed by Aarve Solar

Overview

How it works on your site

Aarve Solar street lights deliver dependable outdoor illumination using energy harvested directly from the sun. An integrated solar power system stores energy during daylight and powers the lighting after sunset.

With no dependence on conventional grid power, solar street lighting is particularly effective for roads, layouts, campuses, industrial premises and locations where electrical infrastructure is limited or expensive to extend.

We install street, garden and ambient fittings, and pair them with the rest of the site: the same poles can carry the integrated CCTV units from our surveillance line.

  • Independent of conventional grid power
  • Automatic day/night operation
  • Minimal cabling requirements
  • Suitable for remote locations
  • Low maintenance operation

At a glance

Fittings
Street · Garden · Ambient
Operation
Dusk-to-dawn on battery
Installation
No trenching, no cabling
Metering
No meter, no bill

The range

Solar lights we supply

Sized and quoted after the survey. Ask us for the full price list — the range runs wider than the six shown here.

  • AS-SL-09

    25W HH solar street light

    5V 18W mono panel, 18Ah LiFePO4, 12-hour backup, 100 sq ft coverage at 4.5 m. Motion sensor, IP65.

  • AS-SL-10 — 300W HH solar street light
    AS-SL-10

    300W HH solar street light

    5V 25W mono panel, 30Ah LiFePO4, 12-hour backup, 150 sq ft coverage at 5 m. Motion sensor, IP65.

  • AS-SL-12 — 50W semi-integrated street light
    AS-SL-12

    50W semi-integrated street light

    5V 50W mono panel, 50Ah LiFePO4, 10–12 hour backup at 5 m. Wall bracket included, IP65.

  • AS-SL-13 — 60W six-lens street light
    AS-SL-13

    60W six-lens street light

    5V 65W mono panel, 60Ah LiFePO4, 10–12 hour backup, 200 sq ft coverage. IP65.

  • AS-SL-14 — 80W eight-lens street light
    AS-SL-14

    80W eight-lens street light

    5V 85W mono panel, 80Ah LiFePO4, 10–12 hour backup, 250 sq ft coverage. IP65.

  • AS-SL-17 — 35W three-lens street light
    AS-SL-17

    35W three-lens street light

    5V 36W mono panel, 30Ah LiFePO4, 12-hour backup, 100 sq ft coverage at 5 m. Motion sensor, IP65.

Before we install

What your site needs

Our engineer checks all of this during the free survey. Nothing here has to be ready before you call us.

  1. 1Open sky above the panelNo branches or overhang above the panel on top of the pole.
  2. 2Pole heightTwelve to twenty feet, depending on the width of the road.
  3. 3Concrete baseA small concrete foundation in the ground to hold the pole firm.
  4. 4Away from bright signageSited clear of large illuminated boards, so the dusk sensor reads the sky and not them.
  5. 5An occasional wipeDust taken off the panel now and then keeps the battery charging fully.

Downloads

Take the details with you

Placeholder documents — Aarve's real brochures replace these before launch.

Also from Aarve

The rest of the site, same contractor

All products

Get solar lights surveyed for your site

An engineer visits, measures, and gives you a written estimate. No charge and no obligation to proceed.

WhatsApp usBook the survey

Or call +91 90367 54985

CallWhatsAppCalculate