Skip to content
Aarve Solar

Products · Aarve Solar

Solar pumps

Move water with the power of sunlight — no diesel, and no wait for a grid connection.

1 HP to 50 HP

Solar pumps installed by Aarve Solar

Overview

How it works on your site

Aarve Solar water pumping systems transform available solar energy into a practical water-lifting solution for agricultural, irrigation and water-supply requirements.

Designed for locations where grid electricity is unreliable, unavailable or expensive, solar pumping is an alternative to conventional electric or diesel-powered systems. The solution is engineered according to water requirement, pumping depth, head and site conditions.

We install from 1 HP to 50 HP — submersible, PMSM and BLDC, open well and monoblock. The match is engineered, not guessed.

  • Reduced dependence on grid electricity
  • Reduced diesel consumption
  • Designed for off-grid applications
  • Lower recurring energy costs
  • Site-specific system design

At a glance

Power range
1 HP to 50 HP
Pump types
Submersible · PMSM/BLDC · Open well · Monoblock
Sizing
Matched to head, discharge and depth
Running cost
No fuel, no grid bill

The range

Solar pumps we supply

Sized and quoted after the survey. Ask us for the full price list — the range runs wider than the six shown here.

  • 1 HPTo confirm

    Submersible pump set

    Small borewells and household water supply.

  • 2 HPTo confirm

    Submersible pump set

    Kitchen gardens and small holdings.

  • 3 HPTo confirm

    Submersible / open well

    The common size for small-farm irrigation.

  • 5 HPTo confirm

    PMSM / BLDC submersible

    Mid-size holdings, deeper borewells.

  • 7.5 HPTo confirm

    PMSM / BLDC submersible

    Larger acreage with sustained daily pumping.

  • 10–50 HPTo confirm

    High-capacity pump sets

    Plantations, estates and rural water supply schemes.

Before we install

What your site needs

Our engineer checks all of this during the free survey. Nothing here has to be ready before you call us.

  1. 1Shadow-free arrayThe panel structure faces south, with no shade from trees or nearby buildings.
  2. 2Known water depthThe borewell or open well is measured first, so the pump is sized correctly.
  3. 3Tank platformFlat, firm ground or a raised tower for the storage tank.
  4. 4Short pipe runPanels and controller sit close to the water source, so little power is lost on the way.
  5. 5Dedicated earthingAn earthing pit, to protect the motor and controller from voltage spikes.

Downloads

Take the details with you

Placeholder documents — Aarve's real brochures replace these before launch.

Also from Aarve

The rest of the site, same contractor

All products

Get solar pumps surveyed for your site

An engineer visits, measures, and gives you a written estimate. No charge and no obligation to proceed.

Or call +91 90367 54985

CallWhatsAppCalculate